show maclock stations
15-48 Security Configuration
show maclock stations
UsethiscommandtodisplayMAClockinginformationaboutendstationsconnectedtothe
switch.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
Defaults
Ifnoparametersarespecified,MAClockinginformationwillbedisplayedforallendstations.
Mode
Switchcommand,read‐only.
Port Status Whether MAC locking is enabled or disabled on the port. MAC locking is globally
disabled by default. For details on enabling MAC locking on the switch and on one or
more ports, refer to “set maclock enable” on page 15-49 and “set maclock” on
page 15-50.
Trap Status Whether MAC lock trap messaging is enabled or disabled on the port. For details
on setting this status, refer to “set maclock trap” on page 15-56.
Aging Status Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
Refer to “set maclock agefirstarrival” on page 15-54.
Max Static Allocated The maximum static MAC addresses allowed locked to the port. For details on
setting this value, refer to “set maclock static” on page 15-52.
Max FirstArrival
Allocated
The maximum end station MAC addresses allowed locked to the port. For details on
setting this value, refer to “set maclock firstarrival” on page 15-53.
Last Violating MAC
Address
Most recent MAC address(es) violating the maximum static and first arrival value(s)
set for the port.
Table 15-51 show maclock Output Details (Continued)
Output Field What It Displays...
firstarrival (Optional)DisplaysMAClockinginformationaboutendstationsfirst
connectedtoMAClockedports.
static (Optional)DisplaysMAClockinginformationaboutstatic(management
defined)endstationsconnectedtoMAClockedports.
port‐string (Optional)Displaysendstationinformationforspecifiedport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,refer
to“PortString
SyntaxUsedintheCLI”onpage 4‐1.
To Next Page
Loading...
Need help?
General
