set port inlinepower
D-Series CLI Reference 2-33
Example
ThisexampleshowshowtodisplayPoEinf ormationforportge.2.1.Inthiscase,theport’s
administrativestate,PoEpriorityandclasshavenotbeenchangedfromdefaultvalues:
D2(su)->show port inlinepower ge.2.1
Port Type Admin Oper Priority Class Power(W)
---- ---- ----- ---- -------- ----- --------
ge.2.1 wireless auto searching low 0 15.4
set port inlinepower
UsethiscommandtoconfigurePoEparametersononeormoreports.
Syntax
set port inlinepower port-string {[admin {off | auto}] [priority {critical | high
| low}] [type type]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenablePoEonportge.3.1withcriticalpriority:
D2(su)->set port inlinepower ge.3.1 admin auto priority critical
Downloading a Firmware Image
YoucanupgradetheoperationalfirmwareintheD‐Seriesswitchwithoutphysicallyopeningthe
switchorbeinginthe samelocation.Therearetwowaystodownloadfirmwaretotheswitch:
•ViaTFTPdownload.ThisprocedureusesaTFTPserverconnectedtothenetworkand
downloadsthefirmwareusing the
TFTPprotocol.FordetailsonhowtoperformaTFTP
downloadusingthecopycommand,referto“copy”onpage2‐45.Forinformationonsetting
TFTPtimeoutandretryparameters,referto“settftptimeout”onpage2‐47and“settftp
retry”onpage2‐
48.
•Viatheserial(console)port.Thisprocedureisanout‐of‐bandoperationthatcopiesthe
firmwarethroughtheserialporttotheswitch.Itshouldbeusedincaseswhenyoucannot
connecttheswitchtoperformthein‐bandcopydownloadprocedureviaTFTP.Serialconsole
downloadhas
beensuccessfullytestedwiththefollowingapplications:
port‐string Specifiestheport(s)onwhichtoconfigurePoE.
adminoff|auto SetsthePoEadministrativestatetooff(disabled)orauto(on).
prioritycritical|
high|low
Setstheport(s)priorityforthePoEallocationalgorithmtocritical
(highest),highorlow.
type
type Specifiesastringdescribingthetypeofdeviceconnectedtoaport.
To Next Page
Loading...
Need help?
General
