To Next Page

To Previous Page

clear port advertise

D-Series CLI Reference 4-17

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoconfigureport1toadvertise1000BASE‐Tfullduplex:

D2(su)->set port advertise ge.1.1 1000tfd

clear port advertise

Usethiscommandtoconfigureaporttonotadvertiseaspecificspeed/duplexcapabilitywhen

auto‐negotiatingwithanotherport.

Syntax

clear port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd

| pause}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

100txfd Advertise100BASE‐TXfullduplexmode.Referto“ConfiguringSFPPorts

for100BASE‐FX”onpage 4‐2formoreinformationonsettingadvertised

abilityfor100MbSFPtranceivers.

1000t Advertise1000BASE‐Thalfduplexmode.

1000tfd Advertise1000BASE‐Tfullduplexmode.

pause AdvertisePAUSEforfull‐duplex

links.

port‐string Clearadvertisementsforspecificport(s).Foradetaileddescriptionof

possibleport‐stringvalues,referto“PortStringSyntaxUsedinthe

CLI”onpage4‐1.

10t Donotadvertise10BASE‐Thalfduplexmode.

10tfd Donotadvertise10BASE‐Tfullduplexmode.

100tx Donotadvertise100BASE‐TX

halfduplexmode.

100txfd Donotadvertise100BASE‐TXfullduplexmode.

1000t Donotadvertise1000BASE‐Thalfduplexmode.

1000tfd Donotadvertise1000BASE‐Tfullduplexmode.

pause DonotadvertisePAUSEforfull‐duplexlinks.

Enterasys D2 D2G124-12P User Manual

Questions and Answers: