Enterasys D2 D2G124-12P User Manual

clear gvrp
D-Series CLI Reference 7-23
Mode
Switchcommand,read‐write.
Examples
ThisexampleshowshowtoenableGVRPgloballyonthedevice:
D2(su)->set gvrp enable
ThisexampleshowshowtodisableGVRPgloballyonthedevice:
D2(su)->set gvrp disable
ThisexampleshowshowtoenableGVRPonge.1.3:
D2(su)->set gvrp enable ge.1.3
clear gvrp
UsethiscommandtoclearGVRPstatusorononeormoreports.
Syntax
clear gvrp [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPstatuswillbeclearedforallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearGVRPstatusgloballyonthedevice:
D2(su)->clear gvrp
set garp timer
Usethiscommandtoadjustthevaluesofthejoin,leave,andleavealltimers.
Syntax
set garp timer {[join timer-value] [leave timer-value] [leaveall timer-value]}
port-string
Parameters
port‐string (Optional)ClearsGVRP statusonspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page 4‐1.
jointimer‐value SetstheGARPjointimerincentiseconds(Referto802.1Qstandard.)
leavetimer‐value SetstheGARPleavetimerincentiseconds(Refer to802.1Qstandard.)

Enterasys D2 D2G124-12P Specifications

General

Brand	Enterasys
Model	D2 D2G124-12P
Category	Network Router
Language	English