Enterasys D2 D2G124-12P - Show License

show license
D-Series CLI Reference 2-29
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoactivateapermanentlicensekeyontheswitchwithserialnumber
075103099041.Inthisexample,theswitchisastand‐aloneunitsoitsunitnumberis1.
D2(rw)->set license INCREMENT D2Policy 2008.0212 permanent DF6A8558E5AB
075103099041
Validating license on unit 1
License successfully validated and set on unit 1
D2(rw)->
show license
Usethiscommandtodisplaylicensekeyinformationforswitcheswithactivatedlicenses.
Syntax
show license
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
type Specifiesthetypeoflicense.FortheD‐Series,thevalueinthisfieldis
alwaysINCREMENT.
feature Thenameofthefeaturebeinglicensed.
DBV Adate‐relatedstringgeneratedaspartofthelicense.
expiration Indicateswhetherthelicenseisapermanentoranevaluationlicense.If
thelicenseisanevaluationlicense,thisfieldwillcontaintheexpiration
dateofthelicense.Ifthelicenseisapermanentlicense,thisfieldwill
containtheword“permanent.”
key Thelicensekey.
hostid Theserialnumberoftheswitchtowhichthislicenseapplies.