Enterasys D2 D2G124-12P

clear rmon filter
D-Series CLI Reference 13-19
Defaults
Ifownerisnotspecified,itwillbesettomonitor.
Ifnootheroptionsarespecified,none(0)willbeapplied.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateRMON filter1andapplyittochannel9:
D2(rw)->set rmon filter 1 9 offset 30 data 0a154305 dmask ffffffff
clear rmon filter
UsethiscommandtoclearanRMONfilterentry.
Syntax
clear rmon filter {index index | channel channel}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearRMONfilterentry1:
D2(rw)->clear rmon filter index 1
dmaskdmask (Optional)Specifiesthemaskappliedtodatatoindicatewhichbitsare
significant.
dnotmaskdnotmask (Optional)Specifiestheinversionmaskthatindicateswhichbitsshould
besetornotset.
owner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.
indexindex|
channelchannel
Clearsaspecificfilterentry,orallentriesbelongingtoaspecificchannel.