Enterasys D2 D2G124-12P

clear sntp poll-timeout
D-Series CLI Reference 12-31
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosettheSNTPpolltimeoutto10seconds:
D2(su)->set sntp poll-timeout 10
clear sntp poll-timeout
UsethiscommandtocleartheSNTPpolltimeout.
Syntax
clear sntp poll-timeout
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheSNTPpolltimeout:
D2(su)->clear sntp poll-timeout
Configuring Node Aliases
Purpose
Toreview,disable,andre‐enablenode(port)aliasfunctionality,which determineswhatnetwork
protocolsarerunningononeormoreports.
Commands
For information about... Refer to page...
show nodealias config 12-32
set nodealias 12-32
clear nodealias config 12-33