Enterasys D2 D2G124-12P

Statistics Group Commands
D-Series CLI Reference 13-3
Statistics Group Commands
Purpose
Todisplay,configure,andclearRMONstatistics.
Commands
show rmon stats
UsethiscommandtodisplayRMONstatisticsmeasuredforoneormoreports.
Syntax
show rmon stats [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,RMONstatswillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Note: Due to hardware limitations, the only frame error counted is oversized frames.
For information about... Refer to page...
show rmon stats 13-3
set rmon stats 13-4
clear rmon stats 13-5
port‐string (Optional)DisplaysRMONstatisticsforspecificport(s).