Enterasys D2 D2G124-12P User Manual

Configuring Simple Network Time Protocol (SNTP)
D-Series CLI Reference 12-25
Configuring Simple Network Time Protocol (SNTP)
Purpose
ToconfiguretheSimpleNetworkTimeProtocol(SNTP),whichsynchronizesdeviceclocksina
network.
Commands
show sntp
UsethiscommandtodisplaySNTPclientsettings.
Syntax
show sntp
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Note: A host IP address must be configured on the D2 to support SNTP.
For information about... Refer to page...
show sntp 12-25
set sntp client 12-27
clear sntp client 12-27
set sntp server 12-28
clear sntp server 12-28
set sntp poll-interval 12-29
clear sntp poll-interval 12-29
set sntp poll-retry 12-29
clear sntp poll-retry 12-30
set sntp poll-timeout 12-30
clear sntp poll-timeout 12-31

Enterasys D2 D2G124-12P Specifications

General

Brand	Enterasys
Model	D2 D2G124-12P
Category	Network Router
Language	English