To Next Page

To Previous Page

set diffserv policy police action conform

D-Series CLI Reference 8-13

set diffserv policy police action conform

Usethiscommandtoconfiguretrafficpolicingactionsforpacketsthatconformtoassociated

Diffservclassifications.

Syntax

set diffserv policy police action conform {drop | send policyname classname} |

{markdscp | markprec policyname classname value}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

Ifyouconfigurethedeviceusingoptionbeorcs0withthecommandsetdiffservpolicypolice

actionconformmarkdscppolicynameevery,thecommandwillexecuteproperly,butwillbe

displayedintherunningconfigassetdiffservpolicypoliceactionconformmarkdscppolicyname

every0.

Example

ThisexampleshowshowtosetthepolicingactiontosendforpacketsconformingtoDiffserv

policy“admin,”class“system.”

D2(rw)->set diffserv policy police action conform send admin system

set diffserv policy police action nonconform

Usethiscommandtoconfiguretrafficpolicingactionsforpacketsthatdonotconformto

associatedDiffservclassifications.

Syntax

set diffserv policy police action nonconform {drop | send policyname classname} |

{markdscp | markprec policyname classname value}

Parameters

drop|send Specifieswhetherthepolicingactionforpacketsconformingtothe

classificationparameterswillbetodroporsendpackets.

policyname Specifiesthepolicynamebeingconfigured.

classname SpecifiesaDiffservclasstoassociatetothispolicingaction.

markdscp|markprec SpecifiesapolicingactionbasedonIPDHCPorprecedence.

value

SpecifiesanIPDHCPorprecedencevaluesetwiththesetdiffserv

policymarkcommand(page8‐11).

drop|send Specifieswhetherthepolicingactionforpacketsnotconformingtothe

classificationparameterswillbetodroporsendpackets.

Enterasys D2 D2G124-12P User Manual

Questions and Answers: