show policy capability
9-8 Policy Classification Configuration
show policy capability
UsethiscommandtodisplaydetailedpolicyclassificationcapabilitiessupportedbyyourD‐Series
device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
UsethiscommandtodisplaydetailedpolicyclassificationcapabilitiessupportedbyyourD‐Series
device.Theoutputofthiscommandshowsatablelistingclassifiabletrafficattributesandthetype
ofactions,byruletype,thatcanbeexecutedrelativetoeachattribute.Abovethetableisalistof
all
theactionspossibleonthisdevice.
Theleft‐mostcolumnofthetablelistsallpossibleclassifiabletrafficattributes.Thenexttwo
columnsfromtheleftindicatehowpolicyprofilesmaybeassigned,eitheradministrativelyor
dynamically.Thenextfourcolumnsfromtheleftindicatetheactionsthatmaybeperformed.
The
lastthreecolumnsindicateauditingoptions.
Anxinanactioncolumnforatrafficattributerowindicatesthatyoursystemhasthecapabilityto
performthatactionfortrafficclassifiedbythatattribute.
ST Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS If applicable, Class of Service value to which this rule applies.
U Whether or not this rule has been used.
dPID Whether or not this is a dynamic profile ID.
aPID Whether or not this is an administrative profile ID.
Table 9-34 show policy rule Output Details (Continued)
Output Field What It Displays...