Enterasys D2 D2G124-12P

clear rmon stats
D-Series CLI Reference 13-5
clear rmon stats
UsethiscommandtodeleteoneormoreRMONstatisticsentries.
Syntax
clear rmon stats {index-list | to-defaults}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodeleteRMONstatisticsentry2:
D2(rw)->clear rmon stats 2
History Group Commands
Purpose
Todisplay,configure,andclearRMONhistorypropertiesandstatistics.
Commands
show rmon history
UsethiscommandtodisplayRMONhistorypropertiesandstatistics.TheRMONhistorygroup
recordsperiodicstatisticalsamplesfromanetwork.
Syntax
show rmon history [port-string]
index‐list Specifiesoneormorestatsentriestobedeleted,causingthemtodisappear
fromanyfutureRMONqueries.
to‐defaults Resetsallhistoryentriestodefaultvalues.Thiswillcauseentriesto
reappearinRMONqueries.
For information about... Refer to page...
show rmon history 13-5
set rmon history 13-6
clear rmon history 13-7