Enterasys D2 D2G124-12P

show snmp access
5-16 SNMP Configuration
Defaults
Ifgroupnameisnotspecified,accessinformationforallSNMPgroupswillbedisplayed.
Ifsecurity‐modelisnotspecified,accessinformationforallSNMPversionswillbedisplayed.
Ifnoauthentication,authenticationorprivac yarenotspecified,accessinformationforall
securitylevelswillbedisplayed.
Ifcontextisnotspecified,
allcontextswillbedisplayed.
Ifvolatile,nonvolatileorread‐onlyarenotspecif ied,allentriesofallstoragetypeswillbe
displayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySNMPaccess information:
D2(su)->show snmp access
Group = SystemAdmin
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Group = NightOperator
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Table 5‐22providesanexplanationofthecommandoutput.
volatile|
nonvolatile|read‐
only
(Optional)Displaysaccessentriesforaspecificstoragetype.
Table 5-22 show snmp access Output Details
Output Field What It Displays...
Group SNMP group name.
Security model Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)