Enterasys D2 D2G124-12P

show diffserv service info
D-Series CLI Reference 8-15
Commands
ThecommandsusedtoreviewandassignDiffservpoliciestoserviceportsarelistedbelowand
describedintheassociatedsectionasshown.
show diffserv service info
UsethiscommandtodisplayinformationaboutDiffservserviceports.
Syntax
show diffserv service info {summary | detailed port-string} {in}
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayasummaryofincomingDiffservserviceporttraffic:
D2(rw)->show diffserv service info summary in
DiffServ Admin Mode............................ Enable
Interface Direction OperStatus Policy Name
----------- ----------- ---------- ----------------------
ge.1.1 In Up admin
ge.1.2 In Up admin
ge.1.3 In Up admin
show diffserv service stats
UsethiscommandtodisplayDiffservpolicyservicestatistics.
Syntax
show diffserv service stats {summary | detailed port-string} {in}
For information about... Refer to page...
show diffserv service info 8-15
show diffserv service stats 8-15
set diffserv service 8-16
summary DisplaysDiffservserviceportsummaryinformation.
detailedport ‐string Displaysdetailedinformationforaspecificport(s).
in Displaysinformationaboutincomingtraffic.