Enterasys D2 D2G124-12P User Manual

set ciscodp status
D-Series CLI Reference 3-9
set ciscodp status
UsethiscommandtoenableordisabletheCiscodiscoveryprotocolgloballyontheswitch.
Syntax
set ciscodp state {auto | disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtogloballyenableCiscoDP:
D2(su)->set ciscodp state enable
set ciscodp timer
UsethiscommandtosetthenumberofsecondsbetweenCiscodiscoveryprotocolPDU
transmissions.
Syntax
set ciscodp timer seconds
Parameters
Defaults
None.
trusted The trust mode of the port. Default of trusted can be changed using the set ciscodp
port command.
cos The Class of Service priority value for untrusted traffic. The default of 0 can be
changed using the set ciscodp port command.
Table 3-10 show ciscodp port info Output Details (Continued)
Output Field What It Displays...
auto GloballyenableonlyifCiscoDPPDUsarereceived.
disable GloballydisableCiscodiscoveryprotocol.
enable Globa llyenableCiscodiscoveryprotocol.
seconds SpecifiesthenumberofsecondsbetweenCiscoDPPDUtransmissions.
Validvaluesarefrom5to254seconds.

Enterasys D2 D2G124-12P Specifications

General

Brand	Enterasys
Model	D2 D2G124-12P
Category	Network Router
Language	English