Enterasys D2 D2G124-12P

set macauthentication portreauthenticate
D-Series CLI Reference 15-27
set macauthentication portreauthenticate
Usethiscommandtoforceanimmediatereauthenticationofthecurrentlyactivesessionsonone
ormoreMACauthenticationports.
Syntax
set macauthentication portreauthenticate port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoforcege.2.1though5toreauthenticate:
D2(su)->set macauthentication portreauthentication ge.2.1-5
set macauthentication macreauthenticate
UsethiscommandtoforceanimmediatereauthenticationofaMACaddress.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoforcetheMACauthenticationsessionforaddress00‐60‐97‐b5‐4c‐07
toreauthenticate:
D2(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
port‐string SpecifiesMACauthenticationport(s)tobereauthenticated.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 4‐1.
mac‐addr SpecifiestheMACaddressofthesessiontoreauthenticate.