Enterasys D2 D2G124-12P

set mac unreserved-flood
12-24 Logging and Network Management
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampledisplaysthestatusofmulticastfloodprotection.
D2(su)->show mac unreserved-flood
mac unreserved flood is disabled.
set mac unreserved-flood
Usethiscommandtoenableordisablemulticastfloodprotection.Whenenabled,thisprevents
policyprofilesrequiringafull10masksfrombeingloaded.
Syntax
set mac unreserved-flood {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thefollowingaddresseswillbeforwardedwhenthisfunctionisenabled:
01:80:C2:00:00:11
01:80:C2:00:00:14
01:80:C2:00:00:15
Thedefaultstateisdisabled,andtheseaddresseswillnotbeforwarded.
Example
Thisexampleenablesmulticastfloodprotection.
D2(su)->set mac unreserved-flood enable
disable|enable Disablesorenablesmulticastfloodprotection.