Enterasys D2 D2G124-12P

clear policy profile
D-Series CLI Reference 9-5
clear policy profile
Usethiscommandtodeleteapolicyprofileentry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodeletepolicyprofile8:
D2(su)->clear policy profile 8
Configuring Classification Rules
Purpose
Toreview,create,assign,andunassignclassificationrulestopolicyprofiles.Thismapsuser
profilestoprotocol‐basedframefilteringpolicies.
Commands
profile‐index Specifiestheindexnumberoftheprofileentrytobedeleted.Validvalues
are1to255.
For information about... Refer to page...
show policy rule 9-6
show policy capability 9-8
set policy rule 9-10
clear policy rule 9-12
clear policy all-rules 9-13