Enterasys D2 D2G124-12P - Set Macauthentication Macinitialize; Set Macauthentication Reauthentication

set macauthentication macinitialize
15-26 Security Configuration
set macauthentication macinitialize
UsethiscommandtoforceacurrentMACauthenticationsessiontore‐initializeandremovethe
session.
Syntax
set macauthentication macinitialize mac-addr
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtoforcetheMACauthenticationsessionforaddress00‐60‐97‐b5‐4c‐07
tore‐initialize:
D2(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
UsethiscommandtoenableordisablereauthenticationofallcurrentlyauthenticatedMAC
addressesononeormoreports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenableMACreauthenticationonge.4.1though5:
D2(su)->set macauthentication reauthentication enable ge.4.1-5
mac‐addr SpecifiestheMACaddressofthesessiontore‐initialize.
enable|disable EnablesordisablesMACreauthentication.
port‐string Specifiesport(s)onwhichtoenableordisableMACreauthentication.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐1.