HEADER ATTAC HMENT/D ETACH ME NT
16. Align lugs on connector (A) with slots in receptacle (B),
push connector onto receptacle, and turn collar on
connector to lock it in place.
Figure 4.9: Electrical Connection
17. Rotate disc (A) on adapter driveline storage hook, and
remove driveline from hook.
Figure 4.10: Disc on Adapter D riveline
Storage Hook
18. Pull back collar (A) on end of driveline, and pu sh o n to
combine output shaft (B) u ntil collar locks.
Figure 4.11: Combine Output Shaft
147695 202 Revision A
To Next Page
Loading...
