HEADER ATTA CHMEN T/DETACHMENT
12. Position coupler on header receptacle (A), and push
handle (B) (not shown) to engage coupler pins
into receptacle.
13. Push handle (B) to closed position until lock button (C)
snaps out.
Figure 4.6: Hydraulic Connection
14. Remove cover on electrical receptacle (A). Ensure
receptacle is clean and has no signs of damage.
Figure 4.7: Electrical Receptacle
15. Remove electrical connector (A) from storage cup on
combine, and route to adapter receptacle.
Figure 4.8: Combine
147695 201 Revision A
To Next Page
Loading...
