Motorola RFS Series

Common Commands
2-111
(config-wireless) Executable Mode
Displays the (config- wireless) configuration parameters and information
Syntax
show wireless ap [LIST|config]
show wireless config [<1-1024>|LIST]
show wireless radio [<1-4096>|admission-control|all|
beacon-table|config|monitor-table|statistics|unadopted|
uptime|voice]}
show wireless wlan [config|statistics]
show wireless wlan config [<1-256>|all|enabled]
show wireless wlan statistics <1-256> detail
Parameters (config-wireless) Executable Mode
show wireless ap
[LIST|config]
Displays wireless LAN parameters. The following
information is displayed:
• LIST– MAC address of a single access-port or a list of
indices (e.g.1-4,10) for detailed information
• config [<1-1024>|config] – Displays status of configured
access-port
• <1-1024> – A single ap index
• LIST – Defines MAC Address of a single access port
show wireless radio
[<1-4096>|
admission-control|all|
beacon-table|
config|monitor-
table|statistics|
unadopted|uptime
|voice]}
Refer show wireless radio configuration parameters see
the command wireless