Remote Control Commands
R&S
®
SMBV100B
669User Manual 1178.4460.02 ─ 03
Usage: Query only
Manual operation: See "I/Q Connection" on page 447
:SCONfiguration:EXTernal:DIGital:RCONnection:STATe?
:SCONfiguration:EXTernal:IQOutput:RCONnection:STATe?
Queries the status of the remote connection.
Return values:
<State> 0 | 1 | OFF | ON
Example: See Example "Connecting and configuring external instrument"
on page 662.
Usage: Query only
Manual operation: See "Remote Connection Status" on page 447
:SCONfiguration:EXTernal:DIGital:INAMe?
:SCONfiguration:EXTernal:IQOutput:INAMe?
Queries the name of the connected external instrument.
Return values:
<InstrName> string
Returns the name of the connected external instrument.
<InstrmentName> (SerialNumber) <Path>
the instrument name, as retrieved via the DIG I/Q interface
<InstrmentName>[, <RfPath>] or <InstrmentName> (Serial-
Number)
the instrument name, as defined in with the "Remote Config"
settings or as defined by the command :SCONfiguration:
EXTernal:REMote:ADD
Example: See Example "Connecting and configuring external instrument"
on page 662.
Usage: Query only
Manual operation: See "Instrument Name" on page 448
:SCONfiguration:EXTernal:DIGital:RF:COUPling <RfCouplingState>
:SCONfiguration:EXTernal:IQOutput:RF:COUPling <RfCouplingState>
Enables/disables coupling all major RF setting (like the frequency, level and RF state)
of the external instrument to the R&S SMBV100B.
Parameters:
<RfCouplingState> 0 | 1 | OFF | ON
*RST: 1
SCONfiguration Subsystem
To Next Page
Loading...
