SMC Networks LECSN-T Series - App. 4.7 Transportation and storage

APPENDIX
App. - 14
App. 4.7 Transportation and storage
CAUTION
Transport the products correctly according to their mass.
Stacking in excess of the limited number of product packages is not allowed.
Do not carry the driver by the front cover during transportation. The product
may fall.
For detailed information on transportation and handling of the battery, refer to
app. 2 and app. 3.
Install the product in a load-bearing place of driver and servo motor in
accordance with the manual.
Do not get on or put heavy load on the equipment.
Do not hold the cables, or connectors when carrying the driver. Otherwise, it
may drop.
When you keep or use it, please fulfill the following environment.
Item
Environment
Operation
[°C]
0 to 55 Class 3K3 (IEC/EN 60721-3-3)
Ambient
temperature
Transportation (Note)
[°C]
-20 to 65 Class 2K4 (IEC/EN 60721-3-2)
Storage (Note)
[°C]
-20 to 65 Class 1K4 (IEC/EN 60721-3-1)
Ambient
humidity
Operation,
transportation, storage
5% to 90 %RH
Vibration
load
Test condition
10 Hz to 57 Hz with constant amplitude of 0.075 mm
57 Hz to 150 Hz with constant acceleration of 9.8 m/s
2
to IEC/EN 61800-5-1
(Test Fc of IEC 60068-2-6)
Operation
5.9 m/s
2
Transportation (Note)
Class 2M3 (IEC/EN 60721-3-2)
Storage
Class 1M2 (IEC/EN 60721-3-2)
Pollution degree
2
IP rating
IP20 (IEC/EN 60529), Terminal block IP00
Open type (UL 50)
Altitude
Operation, storage
Max. 2000 m above sea level
Transportation
Max. 10000 m above sea level
Note.
In regular transport packaging