SMC Networks LECSN-T Series - 5.2.5 Extension setting 2 parameters ([Pr. PE_ _ ])

5. PARAMETERS
5 - 68
5.2.5 Extension setting 2 parameters ([Pr. PE_ _ ])
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Network
ECT
EIP
PNT
PE01
**FCT1
Fully closed
loop function
selection 1
_ _ _ x
Fully closed loop function selection
Do not change this value.
0h
_ _ x _
For manufacturer setting
0h
_ x _ _
0h
x _ _ _
0h
PE03
*FCT2
Fully closed
loop function
selection 2
_ _ _ x
Fully closed loop control error detection function selection
Do not change this value.
3h
_ _ x _
Position deviation error detection system selection
Do not change this value.
0h
_ x _ _
For manufacturer setting
0h
x _ _ _
Fully closed loop control error reset selection
Do not change this value.
0h