SMC Networks LECSN-T Series - Page 173

5. PARAMETERS
5 - 67
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Network
ECT
EIP
PNT
PD37
*TPOP
Touch probe
function
selection
_ _ _ x
Touch probe higher precision selection
Latches the rising of TPR2 correctly, and detects it with an accuracy of 2 µs.
0: Disabled
1: Enabled
When "Enabled" is selected, encoder output pulses are disabled.
0h
_ _ x _
For manufacturer setting
0h
_ x _ _
0h
x _ _ _
0h
PD38
*TPR1
Touch probe
selection 1
_ _ x x
Input signal function selection
Select an input device to be assigned to the CN3-10 pin.
2C: TPR1 (touch probe 1)
2E: ST (operation start-up)
2Ch
_ x _ _
For manufacturer setting
0h
x _ _ _
0h