SMC Networks LECSN-T Series User Manual

20 - 18
20．PROFINET COMMUNICATION
20.4.3.4 Fault number (P947)
The alarm occurrence of driver after power on is displayed. When the alarm does not occur, the read value of
P947.0 will be "0". The error number is as follows.
PNU
Sub
Acces
s
Name
Data Type
Description
Defaul
t
947
0
R
Fault numbers
Array [16]
Unsigned16
Unacknowledged faults
0
8
R
Acknowledged faults
0
Other than
the values
above
R
Fixed to 0
0
PNU
Sub
Range
Units
EEP-ROM
Parameter
947
0 to 15
0000h to FFFFh
Impossible
Value
Description
0x0000
None
0x0010
Generic error
For details of the occurrence of an alarm, refer to Alarm Objects (section 9.3.3).
20.4.3.5 Drive Unit identification (P964)
The identification information of drive unit is returned.
PNU
Sub
Acces
s
Name
Data Type
Description
Defaul
t
964
0
R
Device ident
Array [5]
Unsigned16
Manufacturer ID
Manufacturer ID of Mitsubishi Electric
540
1
R
Device type
0
2
R
Firmware version
The firmware version of the _ driver
Example: 110 means V1.10.
3
R
Firmware date (year)
The firmware update year of the _
driver (not supported)
0000
4
R
Firmware date (day/month)
The firmware update day/month of the
_ driver (not supported)
0000
PNU
Sub
Range
Units
EEP-ROM
Parameter
0
0000h to FFFFh
Impossible
1
0000h to FFFFh
Impossible
964
2
0000h to FFFFh
Impossible
3
0000h to FFFFh
Impossible
4
0000h to FFFFh
Impossible
20.4.3.6 Profile identification number (P965)
PNU
Sub
Acces
s
Name
Data Type
Description
Defaul
t
965
0
R
Profile number
OctetString2
Profile Number 3
03h
1
R
Profile Version Number 41
29h
PNU
Sub
Range
Units
EEP-ROM
Parameter
965
0
03h to 29h
Impossible
1
03h to 29h
Impossible

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English