SMC Networks LECSN-T Series User Manual

19 - 143
19．EtherNet/IP COMMUNICATION
(54) Alarm Monitor 40 Number of tough drive operations (2BA8h)
Ins ID
Attr ID
Access
Name
Data Type
2BA8h
0
Get
Alarm Monitor 40 Number of tough drive operations
DINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2BA8h
0
80000000h to 7FFFFFFFh
number of times
Impossible
The number of tough drive operations at alarm occurrence is returned.
(55) Alarm Monitor 45 Unit power consumption (2BADh)
Ins ID
Attr ID
Access
Name
Data Type
2BADh
0
Get
Alarm Monitor 45 Unit power consumption
DINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2BADh
0
80000000h to 7FFFFFFFh
W
Impossible
The unit power consumption at alarm occurrence is returned.
(56) Alarm Monitor 46 Unit total power consumption (2BAEh)
Ins ID
Attr ID
Access
Name
Data Type
2BAEh
0
Get
Alarm Monitor 46 Unit total power consumption
DINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2BAEh
0
80000000h to 7FFFFFFFh
Wh
Impossible
The unit total power consumption at alarm occurrence is returned.
19.7.3.7 Manufacturer Specific Control Objects (Class ID: 64h)
The instances described in this section support the following service.
When "Get" is in the "Access" field
Service Code
Name
Description
0Eh
Get_Attribute_Single
Reads the value of the specified attribute.
When "Set" is in the "Access" field
Service Code
Name
Description
10h
Set_Attribute_Single
Writes a value to the specified attribute.
When "Get/Set" is in the "Access" field
Service Code
Name
Description
0Eh
Get_Attribute_Single
Reads the value of the specified attribute.
10h
Set_Attribute_Single
Writes a value to the specified attribute.

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English