SMC Networks LECSN-T Series User Manual

11. OPTIONS AND PERIPHERAL EQUIPMENT
11 - 15
11.3.2 System configuration
(1) Components
To use this setup software, the following components are required in addition to the driver and servo
motor.
Equipment
Set up software(MR Configurator2
TM
)
LEC-MRC2E
Personal computer
(Note 1, 2, 3, 4
5, 6, 7, 8, 9)
OS
Microsoft Windows 10 Edition,
Microsoft Windows 10 Enterprise,
Microsoft Windows 10 Pro,
Microsoft Windows 10 Home,
Microsoft Windows 8.1 Enterprise
Microsoft Windows 8.1 Pro
Microsoft Windows 8.1
Microsoft Windows 8 Enterprise,
Microsoft Windows 8 Pro,
Microsoft Windows 8,
Microsoft Windows 7 Ultimate
Microsoft Windows 7 Enterprise
Microsoft Windows 7 Professional
Microsoft Windows 7 Home Premium
Microsoft Windows 7 Starter
Microsoft Windows Vista Ultimate
Microsoft Windows Vista Enterprise
Microsoft Windows Vista Business
Microsoft Windows Vista Home Premium
Microsoft Windows Vista Home Basic
Microsoft Windows XP Professional, Service Pack2 or later
Microsoft Windows XP Home Edition, Service Pack2 or later
IBM PC/AT compatible PC
Hard Disk
1GB or more of free space
Display
One whose resolution is 1024 768 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Keyboard
Connectable with the above personal computer.
Mouse
Connectable with the above personal computer.
Printer
Connectable with the above personal computer.
USB cabl0
(Note 10)
LEC-MR-J3USB
Note 1. Using a PC for setting Windows 10, upgrade to version 1.52E.
Using a PC for setting Windows 8.1, upgrade to version 1.25B.
Using a PC for setting Windows 8, upgrade to version 1.20W.
Refer to Mitsubishi Electric Corporation’s website for version upgrade information.
2. Windows and Windows Vista is the registered trademarks of Microsoft Corporation in the United States and other
countries.
3. On some personal computers, set up software (MR Configurator2
TM
) may not run properly.
4. The following functions cannot be used. If any of the following functions is used, this product may not operate normally.
･ Start of application in Windows® compatible mode.
･ Fast User Switching.
･ Remote Desktop.
･ Windows XP Mode.
･ Windows Touch or Touch.
･ Modern UI
･ Client Hyper-V
･ Tablet Mode
･ Virtual desktop
･ Does not support 64-bit Operating System, except for Microsoft Windows 7 or later.

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English