SMC Networks LECSN-T Series - 20.9.3.12 Point Table Mode Objects

20 - 168
20．PROFINET COMMUNICATION
20.9.3.12 Point Table Mode Objects
(1) Target point table (P11616)
In the point table mode (pt), specify the point table No. to execute. In the indexer mode (idx), set the next
station No to execute. The settable values vary depending on the control mode.
PNU
Sub
Access
Name
Data Type
Description
Default
11616
0
R/W
Target point table
Integer16
Refer to the text.
0
PNU
Sub
Range
Units
EEP-ROM
Parameter
11616
0
Refer to the text.
Impossible
Control mode
Range
Point table mode (pt)
FFFFh to 00FFh (-1 to 255)
Indexer mode (idx)
0000h to 00FEh (0 to 254)
(2) Point demand value (P11624)
In the point table mode (pt), the currently specified point table No. is returned. In the indexer mode (idx),
the currently specified next station No. is returned. The returned values vary depending on the control
mode.
PNU
Sub
Access
Name
Data Type
Description
Default
11624
0
R
Point demand value
Integer16
Refer to the text.
0
PNU
Sub
Range
Units
EEP-ROM
Parameter
11624
0
Refer to the text.
Impossible
Control mode
Range
Point table mode (pt)
FFFFh to 00FFh (-1 to 255)
Indexer mode (idx)
0000h to 00FEh (0 to 254)
(3) Point actual value (P11625)
In the point table mode (pt), the completed point table No. is returned. In the indexer mode (idx), the
completed station No. is returned. The returned values vary depending on the control mode.
PNU
Sub
Access
Name
Data Type
Description
Default
11625
0
R
Point actual value
Integer16
Refer to the text.
0
PNU
Sub
Range
Units
EEP-ROM
Parameter
11625
0
Refer to the text.
Impossible
Control mode
Range
Point table mode (pt)
FFFFh to 00FFh (-1 to 255)
Indexer mode (idx)
0000h to 00FEh (0 to 254)