EasyManua.ls Logo

SMC Networks LECSN-T Series - 19.7.3.2 Communication Setting Objects

SMC Networks LECSN-T Series
1046 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 - 112
19EtherNet/IP COMMUNICATION
19.7.3.2 Communication Setting Objects
(1) Message Router object (Class ID: 02h)
This object distributes messages to object classes or object instances in a driver. No attribute or service
can be used with this object.
(2) Connection Manager Object (Class ID: 06h)
Ins ID
Attr ID
Access
Name
Data Type
1
1
Set
Open Requests
UINT
2
Open Format Rejects
3
Open Resource Rejects
4
Open Other Rejects
5
Close Requests
6
Close Format Rejects
7
Close Other Rejects
8
Connection Timeouts
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
1
1
0
0000h to FFFFh
number of times
Impossible
2
0
3
0
4
0
5
0
6
0
7
0
8
0
This object is used to establish an I/O connection or a dedicated connection when Explicit Message is
frequently used. The description of each Attribute is as follows.
Ins ID
Attr ID
Description
1
1
Number of Forward_Open service requests received
2
Number of Forward_Open service requests that have been rejected due to the incorrect format
3
Number of Forward_Open service requests that have been rejected due to insufficient resource
4
Number of Forward_Open service requests that have been rejected due to a reason other than the incorrect
format or insufficient resource
5
Number of Forward_Close service requests received
6
Number of Forward_Close service requests that have been rejected due to the incorrect format
7
Number of Forward_Close service requests that have been rejected due to a reason other than the incorrect
format
8
Total number of connection time-outs that have occurred in the connection controlled by this Connection
Manager
This instance supports the following services.
Service Code
Name
Description
01h
Get_Attributes_All
Reads the values of all the attributes.
0Eh
Get_Attribute_Single
Reads the value of the specified attribute.
10h
Set_Attribute_Single
Writes a value to the specified attribute.
4Eh
Forward_Close
Closes the connection.
54h
Forward_Open
Opens a connection with data size of up to input 509
bytes and output 505 bytes.
5Bh
Large_Forward_Open
Opens a connection with data size of up to 1448 bytes.

Table of Contents

Related product manuals