SMC Networks LECSN-T Series User Manual

19 - 178
19．EtherNet/IP COMMUNICATION
19.7.3.15 Touch Probe Function Objects (Class ID: 64h)
The instances described in this section support the following service.
When "Get" is in the "Access" field
Service Code
Name
Description
0Eh
Get_Attribute_Single
Reads the value of the specified attribute.
When "Set" is in the "Access" field
Service Code
Name
Description
10h
Set_Attribute_Single
Writes a value to the specified attribute.
When "Get/Set" is in the "Access" field
Service Code
Name
Description
0Eh
Get_Attribute_Single
Reads the value of the specified attribute.
10h
Set_Attribute_Single
Writes a value to the specified attribute.
(1) Touch probe function (60B8h)
Ins ID
Attr ID
Access
Name
Data Type
60B8h
0
Get/Set
Touch probe function
UINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
60B8h
0
0
0000h to FFFFh
Impossible
Set the command for the touch probe function. Refer to section 5.5 (1) (a) for details.
(2) Touch probe status (60B9h)
Ins ID
Attr ID
Access
Name
Data Type
60B9h
0
Get
Touch probe status
UINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
60B9h
0
0000h to FFFFh
Impossible
The status of the touch probe function is returned. Refer to section 5.5 (1) (b) for details.
(3) Touch probe pos1 pos value (60BAh)
Ins ID
Attr ID
Access
Name
Data Type
60BAh
0
Get
Touch probe pos1 pos value
DINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
60BAh
0
0
80000000h to 7FFFFFFFh
pos units
Impossible
The position latched at the rising edge of touch probe 1 is returned.

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English