SMC Networks LECSN-T Series - Page 124

5. PARAMETERS
5 - 18
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Network
ECT
EIP
PNT
PA02
**REG
Regenerative
option
_ _ x x
Regenerative option
Select a regenerative option.
Incorrect setting may cause the regenerative option to burn.
If a selected regenerative option is not for use with the driver, [AL. 37 Parameter
error] occurs.
00: Regenerative option is not used.
02: LEC-LEC-MR-RB-032
03: LEC-LEC-MR-RB-12
00h
_ x _ _
For manufacturer setting
0h
x _ _ _
0h
PA03
*ABS
Absolute
position
detection
system
_ _ _ x
Absolute position detection system selection
Set this digit when using the absolute position detection system.
0: Disabled (incremental system)
1:Enabled (absolute position detection system)
0h
_ _ x _
For manufacturer setting
0h
_ x _ _
0h
x _ _ _
0h