SMC Networks LECSN-T Series User Manual

A - 5
4. Additional instructions
The following instructions should also be fully noted. Incorrect handling may cause a fault, injury, electric
shock, etc.
(1) Transportation and installation
CAUTION
Transport the products correctly according to their mass.
Stacking in excess of the specified number of product packages is not allowed.
Do not hold the front cover when transporting the driver. Otherwise, it may drop.
Install the driver and the servo motor in a load-bearing place in accordance with the Instruction Manual.
Do not get on or put heavy load on the equipment.
The equipment must be installed in the specified direction.
Leave specified clearances between the driver and the cabinet walls or other equipment.
Do not install or operate the driver and servo motor which have been damaged or have any parts missing.
Do not block the intake and exhaust areas of the driver. Otherwise, it may cause a malfunction.
Do not drop or strike the driver and servo motor. Isolate them from all impact loads.
When you keep or use the equipment, please fulfill the following environment.
Environment
Conditions
Driver
Servo motor
Ambient
temperature
In operation
[ ]
0 to 55 (non-freezing)
0 to 40 (non-freezing)
[ ]
32 to 131 (non-freezing)
32 to 104 (non-freezing)
In storage
[ ]
20 to 65 (non-freezing)
15 to 70 (non-freezing)
[ ]
4 to 149 (non-freezing)
5 to 158 (non-freezing)
Ambient
humidity
In operation
90%RH or less (non-condensing)
80%RH or less (non-condensing)
In storage
90%RH or less (non-condensing)
Ambience
Indoors (no direct sunlight) Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude
Max. 2000m (6560 ft) above sea level
(Note)
Vibration
[m/s
2
]
5.9 or less
at 10 Hz to 55 Hz
(directions of X, Y
and Z axes)
LECSN2-T5
LECSN2-T7
LECSN2-T8
LECSN2-T9
series
X Y: 49
When handling the driver, be careful about the edged parts such as corners of the driver.
The driver must be installed in the metal cabinet.

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English