SMC Networks LECSN-T Series User Manual

20 - 129
20．PROFINET COMMUNICATION
(4) Current alarm (P10817)
The number of the current alarm is returned. When no alarm has occurred, "00000000h" is returned. The
description of the values is as follows. If [AL. 16.3] occurs, "00160003h" is returned.
PNU
Sub
Access
Name
Data Type
Description
Default
10817
0
R
Current alarm
Unsigned32
Current alarm
Bit 0 to Bit 15: Alarm detail number
Bit 16 to Bit 31: Alarm number
PNU
Sub
Range
Units
EEP-ROM
Parameter
10817
0
00000000h to FFFFFFFFh
Impossible
(5) Parameter error number (P10820)
When [AL. 37 Parameter error] has occurred, the number of the parameters which cause the error is
returned. Refer to Parameter error list (P10821) for the number of each parameter which causes the
error.
PNU
Sub
Access
Name
Data Type
Description
Default
10820
0
R
Parameter error number
Unsigned16
Parameter error No.
PNU
Sub
Range
Units
EEP-ROM
Parameter
10820
0
0000h to 01F4h
Impossible
(6) Parameter error list (P10821)
When [AL. 37 Parameter error] has occurred, the number of the parameter which causes the error is
returned. For forms of parameter error Nos., refer to chapter 8.13. If [Pr. PC01] is an error factor, "0201h"
is returned.
If more than 17 parameter errors have occurred, the 17th and later parameter errors are returned after
the parameters are corrected and the power is cycled.
PNU
Sub
Access
Name
Data Type
Description
Default
10821
0
R
No. 1
Array [64]
Unsigned16
Parameter error No. 1
1
No. 2
Parameter error No. 2
15
No. 16
Parameter error No. 16
PNU
Sub
Range
Units
EEP-ROM
Parameter
10821
0
0000h to FFFFh
Impossible
1
15

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English