Xerox Phaser 4510 - Registration (Side-To-Side)

Phaser 4500/4510 Service Manual 5-9
Print-Quality Troubleshooting
Registration (Side-to-Side)
Actions and Questions Yes No
Measure the registration on two consecutive test prints.
Fold the paper in half (side-edge to side-edge). Observe
the fold line of the paper with reference to the cross
hairs of the target.
Is the fold within +/- 2.5 mm of the target cross hairs
(each line on the target is 1 mm).
The test
prints meet
the Side-to-
Side
Registration
Specification.
Go to
“Registration
(Lead Edge-
to-Trail
Edge)” on
page 5-10.
Go to
“Registration”
on page 5-46.