Xerox Phaser 4510 - Nudger One-Way Clutch

Phaser 4500/4510 Service Manual 8-17
FRU Disassembly
Nudger One-way Clutch
(PL5.1.42)
Procedure:
1. Remove the 150-sheet paper cassette (tray 1).
2. Open the top cover.
3. Remove the print cartridge, and protect it from light exposure.
4. Remove the feed roller (page 8-16).
5. Slide the feed one-way clutch off the feed shaft.
6. Remove the E-ring retaining the nudger one-way clutch on the feed shaft.
7. Slide the nudger one-way clutch off the feed shaft.
1.Nudger one-way clutch 3.Feed roller
2.Feed one-way clutch
s4500-092
1
2
3