Xerox Phaser 4510 - Nudger One-Way Clutch

8-88 Phaser 4500/4510 Service Manual
FRU Disassembly
Nudger One-way Clutch
(PL20.2.15)
Procedure:
1. Remove the feed roller (page 8-87).
2. Pull out the one-way feed clutch from the feed shaft.
3. Remove the E-ring that secures the nudger one-way clutch to the feed
shaft.
4. Pull out the nudger one-way clutch from the feed shaft.
1.Nudger one-way clutch 3.Feed roller
2.One-way feed clutch
s4500-162
1
2
3