Xerox Phaser 4510 - Right Cover

Phaser 4500/4510 Service Manual 8-7
FRU Disassembly
Right Cover
(PL1.1.4)
Procedure:
1. Loosen the thumbscrew at the rear of the printer that secures the right
cover.
2. Shift the cover towards the rear of the printer to release the four hooks
(two at the bottom edge, one in front, and one on rear), then swing out the
bottom edge.
3. Move the cover downward to release the three tabs along the top edge,
and lift away from the printer.
1.Thumbscrew 2.Bottom Hooks
s4500-058
1
2