Xerox Phaser 4510 - Low Voltage Power Supply (LVPS) (P4500)

8-62 Phaser 4500/4510 Service Manual
FRU Disassembly
Low Voltage Power Supply (LVPS) (P4500)
(PL12.1.5)
Procedure:
1. Remove the front cover (page 8-11).
2. Remove the LVPS shield plate (page 8-60).
Caution
Do not attempt to unplug the cables from J101 or J104 on the LVPS.
These are soldered connections and attempts to disconnect the wires
will damage the circuit board.
1. Exit motor PWBA 3. P101
2.LVPS 4.P/J404
46
47
45
P/J 42 41 40
43
44
48
P/J
s4500-144
1
2
3
4