Xerox Phaser 4510 - Exit Motor PWBA

Phaser 4500/4510 Service Manual 8-61
FRU Disassembly
Exit Motor PWBA
(PL12.1.4)
Procedure:
1. Remove the left cover (page 8-8).
2. Disconnect the harnesses from the connectors (P/J101, P/J102 and P/
J103) on the exit motor PWBA.
3. Remove the two 6 mm screws that attach the exit motor PWBA to the
frame.
4. Remove the exit motor PWBA.
1. Exit motor PWBA 3. P/J 101
2.P/J 102 4.P/J 103
s4500-143
1
2
3
4