Xerox Phaser 4510 - Left Cover Plate

Phaser 4500/4510 Service Manual 8-81
FRU Disassembly
Left Cover Plate
(PL20.1.3)
Procedure:
1. Remove the two 8 mm tapping screws that attach the grounding plate to
the frame.
2. Remove the grounding plate.
3. Lift up the left cover plate just above the boss of the 550 left cover frame a
little to release it.
4. Shift the left cover plate in the direction of the arrow to release the 4
hooks of the 550 left cover frame, and remove the left cover plate from the
optional 550-sheet paper feeder.
1.Grounding plate 3.550 left cover frame
2.Left cover plate
3
s4500-154
2
1