Xerox Phaser 4510 - No Paper Sensor

8-30 Phaser 4500/4510 Service Manual
FRU Disassembly
No Paper Sensor
(PL7.1.38)
Procedure:
1. Remove the 150-sheet feeder assembly (page 8-15).
2. Remove the 6 mm screw that attaches the no paper sensor holder.
3. Remove the no paper sensor holder from the 550-sheet feeder assembly.
4. Release the hooks that secure the no paper sensor to the no paper
sensor holder, and remove the no paper sensor.
5. Unplug the cable connector (P/J246) from the no paper sensor.
1.No paper sensor holder 3.550-sheet feeder assembly
2.No paper sensor
s4500-107
1
2
3
P/J246