Xerox Phaser 4510 - 550-Sheet Feeder PWBA

Phaser 4500/4510 Service Manual 8-85
FRU Disassembly
550-Sheet Feeder PWBA
(PL20.1.34)
Procedure:
1. Remove the right cover plate (page 8-79).
2. Disconnect the harness connectors from the connectors (P/J80, P/J81, P/
J82,
P/J83, P/J84 and P/J85) on the 550-sheet feeder PWBA.
3. Remove the two 8 mm tapping screws that attach the 550-sheet feeder
PWBA to the frame.
4. Remove the 550-sheet feeder PWBA.
1.550-sheet feeder PWBA 2. Boss
s4500-159
P/J82
85
81 84 83
80
1
2