8-40 Phaser 4500/4510 Service Manual
FRU Disassembly
Print Cartridge Left Guide
(PL8.1.15)
Procedure:
1. Remove the fuser assembly (page 8-44).
2. Remove the laser unit shield plate (page 8-39).
3. Remove the fuser harness clamp that secures the fuser harness to the
frame.
4. Remove the rear cover (page 8-6).
5. Remove the transfer chute (page 8-46).
6. P4500: Disconnect P/J142, which connects the 5 V interlock to the LVPS
harness assembly (2-wire gray harness).
P4510: Disconnect P/J141, which connects the 5 V interlock to the laser
unit harness.
7. Remove the LVPS shield plate (page 8-60).
8. Unplug J45 from P45 on the LVPS to disconnect the top cover switch.
1.Print cartridge left guide assembly 4.Gear 3 link
2.Fuser connector (P/J 4647) 5.LVPS
3.Link lever 6. Fuser harness clamp
P/J142
1
P/J4647
J45
J46
J47
s4510-115
5
P45
P46
P46
P47
P47
P45
3
4
P4500
P4510
6
P/J141
To Next Page
Loading...
