Xerox Phaser 4510 - Memory Requirements

Phaser 4500/4510 Service Manual 1-15
General Information
Memory Requirements
Phaser 4500
Characteristic Specification
Minimum
required
64 MB – The Phaser 4500 B configuration reports 48 MB
Maximum
supported
256 MB – accepts modules of 64 or 128 MB in combinations
to a total of 256 MB
Supported type PC133 SDRAM in 144-pin SO-DIMM form
Phaser 4510
Characteristic Specification
Minimum
required
128 MB
Maximum
supported
512 MB – accepts modules of 128 or 256 MB only in
combinations to a total of 512 MB
Supported type PC2700 DDR in 200-pin SO-DIMM form