Xerox Phaser 4510 - Print Engine: Covers; Paper Exit Cover

8-4 Phaser 4500/4510 Service Manual
FRU Disassembly
Print Engine: Covers
Paper Exit Cover
(PL10.1.1)
Procedure:
1. Open the duplex unit if one is installed (page 8-95).
2. Open the paper exit rear door.
3. Unscrew the thumbscrews at the right and left rear sides of the paper exit
cover.
4. Lift the rear of the paper exit cover, then pull back to release the tabs at
the front of the cover.
1.Thumbscrews
s4500-127
1
1