Xerox Phaser 4510 - Stacker PWBA

Phaser 4500/4510 Service Manual 8-119
FRU Disassembly
Stacker PWBA
(PL23.1.22)
Procedure:
1. Remove the stacker front cover (page 8-115).
2. Unplug the harness connectors at P70, P71, P72, P73, P74 and P75 on
the stacker PWBA.
3. Remove the two 8 mm tapping screws that attach the right stacker
support to the stacker housing.
4. Remove the 6 mm screw that attaches the stacker PWBA to the right
stacker support.
5. Remove the stacker PWBA.
1.Stacker PWBA 3.Guide slots
2.Stacker right support
s4500-208
2
3
P74
1
2
P70
P72
P71
P73
P75