8-80 Phaser 4500/4510 Service Manual
FRU Disassembly
Procedure:
1. Remove the 8 mm tapping screw that attaches the right cover plate to the
frame.
2. Lift up the rear of the right cover plate just above the boss of the 550 right
cover frame a little to release it.
3. Shift the right cover plate in the direction of the arrow to release the four
hooks of the 550 right cover frame, and remove the right cover plate from
the optional 550-sheet paper feeder.
Replacement Note:
■ When re-installing the right cover plate, ensure all four hooks are properly
engaged.
To Next Page
Loading...
