Phaser 6128MFP Service Manual 3-7
Error Messages and Codes
FAX
Controller
Report Error
Error 017-980
Press OK Button
<Report File Open/Close Error>
Failed to Open/Close Report
File.
page 3-135
FAX
Controller
MFD Controller Error
Error 017-986
Press OK Button
<File Error>
Empty File Created.
page 3-135
FAX
Controller
MFD Controller Error
Error 017-987
Press OK Button
<File Error>
File read error due to Buffer
overflow.
page 3-135
FAX
Controller
Scan Time Out
Error 017-988
Press OK Button
<PC Scan Time Out>
Timeout at Scan-To-
Application start.
page 3-126
FAX
Controller
MFD Controller Error
Error 017-989
Press OK Button
<File Size Over>
The Writing file size exceeds
the Buffer size.
page 3-135
FAX
Controller
Fax Codec Error
Error 033-500
Press OK Button
<FAX RX JPEG Data Limit>
Incoming FAX JPEG Data
exceeds System Data Limit.
page 3-142
FAX
Controller
Fax Codec Error
Error 033-501
Press OK Button
<CODEC Error>
The Codec process aborted by
read error during manual
dialing.
page 3-145
FAX
Controller
Fax Error
Error 033-502
Press OK Button
<File Open Error>
The File Open error occurred.
page 3-135
FAX
Controller
MFD Memory Full
Error 033-503
Press OK Button
<Memory Full>
Memory full at reception.
page 3-133
FAX
Controller
Fax Codec Error
Error 033-510
Press OK Button
<CODEC Error>
The Decoded Line Count per
Stripe error at JBIG Data
Decoding.
page 3-134
FAX
Controller
Fax Codec Error
Error 033-511
Press OK Button
<MH/MR/MMR Decode Error>
The MH/HR/MMR Received as
0 Line.
page 3-148
FAX
Controller
Fax Communication
Error
Error 033-512
Press OK Button
<Modem Parameter
Exchanege Error>
The Modem Parameter
Exchange error occurred.
page 3-137
FAX
Controller
Fax Communication
Error
Error 033-513
Press OK Button
<Commucation Error>
Communication Interrupted
due to Memory Full.
page 3-133
FAX
Controller
Fax Codec Error
Error 033-514
Press OK Button
<JPEG DNL/SOF0 Error>
Line Number Unavailable at
JPEG Reception.
page 3-142
Error Message Summary (continued)
System Error Message Error Type Go to